I. Core Parameters of a Single Grate Stroke
The grate of a waste-to-energy incinerator functions like a "treadmill" on a conveyor belt, where the forward distance of each stroke directly affects the frequency of waste turning. The typical single stroke distance for Hitachi Zosen furnace grates ranges from 300 to 500 mm. This range ensures adequate mixing of the waste while preventing incomplete combustion caused by excessively rapid movement. The specific value is adjusted according to the furnace model-for example, a shorter stroke may be adopted when processing waste with high moisture content.
II. Design Logic Behind Stroke Distance
- Combustion efficiency balance: An excessively short stroke compacts the waste layer, reducing oxygen penetration; an overly long stroke may cause unburned waste to fall prematurely into the ash hopper.
- Thermal load adaptation: Waste with high calorific value requires more frequent turning, which can be supported by increasing the stroke distance accordingly.
- Mechanical protection: The stroke design must consider the overlap between grate bars to prevent ash and debris leakage.
III. Field Adjustment Techniques for Stroke Setting
- In practice, engineers often adjust the stroke based on flame color observations:
- Increase the stroke slightly when the flame appears predominantly yellow to promote loosening of the waste bed.
- Reduce the stroke in specific zones when localized slagging occurs, to lower mechanical load.
- During rainy seasons when waste moisture is high, adopt a combination strategy of "short stroke + slow speed" for optimal performance.

