Products Description
The High Manganese Steel Composite Hammer Head we produce adopts a bimetallic composite structure of "hard alloy reinforcement + high manganese steel matrix". The core striking part uses high-chromium alloy rods as the wear-resistant framework, and the matrix is made of high-quality modified high manganese steel. Through advanced double-liquid bimetallic composite casting technology, the hidden dangers of falling off and chipping are eliminated. It has both super wear resistance and impact toughness, completely solving the industry pain points of traditional high manganese steel hammer heads, such as low initial hardness, poor wear resistance, and easy plastic deformation.
Product Advantages
Excellent Wear Resistance and Long Service Life
High-hardness alloy rods are pre-embedded on the core striking surface, forming a composite structure of "hard wear-resistant layer + tough matrix". The service life is more than 3-4 times that of ordinary high manganese steel hammer heads, which greatly reduces the replacement frequency and lowers shutdown losses and labor costs.
Strong Impact Toughness and Not Easy to Break
The high manganese steel matrix has undergone professional heat treatment, with excellent impact toughness, which can bear severe impact loads, avoid the hammer head from cracking and breaking when crushing hard materials, adapt to high-impact crushing working conditions, and operate more stably and reliably.
Close Metallurgical Bonding and No Falling-off Hidden Danger
The alloy rod and the high manganese steel matrix achieve metallurgical fusion, with no gaps on the bonding surface and continuous transition of components. It completely solves the safety hazard of chipping and falling off in the traditional alloy inlay process, ensuring that the hammer head remains stable under long-term severe impact.
Product Image
Why Choose Us
Source Manufacturer with Controllable Quality
We have an independent production base, equipped with advanced production lines and complete physical and chemical testing methods. From raw material procurement to finished product delivery, every process strictly follows the standards, and we refuse middlemen to ensure stable product quality and higher cost performance.
Advanced Technology and Mature Craftsmanship
Our production technology is at a high level in China. At the same time, we have been deeply engaged in the research and development of High Manganese Steel Composite Hammer Heads for many years, mastering core heat treatment and composite casting technologies, and we can optimize product performance according to customer needs to adapt to various complex working conditions.
Strong Customization Capability and Wide Adaptability
We have a professional engineering and technical team that can customize High Manganese Steel Composite Hammer Heads of different sizes and performances according to the customer's equipment model, crushed materials, and working conditions, solving the crushing problems under special working conditions.
Installation Requirements
Before installation, check the appearance of the High Manganese Steel Composite Hammer Head to confirm that there are no defects such as cracks, deformation, and chipping, and that the size matches the equipment installation position, so as to avoid loosening, impact, and other problems after installation.
During installation, use a hydraulic torque wrench to fasten the bolts according to the specified torque to ensure that the hammer head is firm and free of loosening. The bolts must be equipped with lock washers to prevent falling off during operation.
After installation, manually rotate the equipment rotor to check the gap between the hammer head and the inner wall of the equipment and the liner, ensure that there is no jamming or collision, and that the gap is reasonable, so as to avoid friction damage to the hammer head during operation.
Production Equipment
FAQ
Q: What is the essential difference between the High Manganese Steel Composite Hammer Head and the ordinary high manganese steel hammer head?
A: The core difference lies in the structure and performance: the ordinary high manganese steel hammer head only adopts a single high manganese steel material, with low initial hardness, poor wear resistance under low-stress wear, and easy plastic deformation; our High Manganese Steel Composite Hammer Head adopts a bimetallic composite structure of "alloy rod + high manganese steel". The alloy rod is responsible for wear resistance, and the high manganese steel matrix provides toughness. The impact resistance and wear resistance are greatly improved, the service life is 3-4 times that of ordinary hammer heads, and the comprehensive cost is lower.
Q: How long is the delivery time of the product?
A: For conventional specifications, the delivery time is 3-7 working days; for customized specifications, the delivery time is 7-15 working days, depending on the customization difficulty and quantity.
Q: How long is the service life of the product?
A: Under normal working conditions, the service life is 3-4 times that of ordinary high manganese steel hammer heads. The specific service life depends on the hardness of the crushed materials, the feeding size, the equipment speed, and the operation specifications. When crushing high-hardness materials, the service life is about 3 times that of ordinary hammer heads; when crushing medium and low-hardness materials, the service life can be more than 4 times. Scientific operation and regular maintenance can further extend the service life.
Hot Tags: high manganese steel composite hammer head, China high manganese steel composite hammer head manufacturers, suppliers, factory, High Manganese Steel Wear Resistant Liner Board, crusher parts, Ball Mill Liners, crusher components, High Chromium Cast Iron Wear Resistant Liner Board, High Mn Steel Crusher Hammer
