Heat-Resistant Steel Casting Products Introduction

Dec 05, 2025

Leave a message

Heat-resistant steel refers to steel that possesses high-temperature oxidation resistance and high-temperature strength. High-temperature oxidation resistance is a crucial condition for ensuring that workpieces can operate reliably at high temperatures. In oxidizing environments such as high-temperature air, oxygen reacts with the steel surface to form various iron oxide layers. This oxide layer is very porous, losing the original properties of the steel and easily peeling off. To improve the high-temperature oxidation resistance of steel, alloying elements are added to change the structure of the oxides. Commonly used alloying elements include chromium, silicon, and aluminum.

 

These elements react with oxygen to form a dense, stable oxide layer, or passivation layer, such as Cr2O3, SiO2, or Al2O3, on the steel surface, protecting the steel from further oxidation. Higher amounts of chromium, silicon, and aluminum improve the high-temperature oxidation resistance of the steel, but excessive amounts of silicon and aluminum can impair the mechanical properties and processability of the steel. Therefore, heat-resistant steel uses chromium as the main alloying element, with silicon and aluminum as auxiliary elements. In short, the high-temperature oxidation resistance of steel is only related to its chemical composition.

 

High-temperature strength refers to the ability of steel to withstand mechanical loads for extended periods at high temperatures. Under mechanical load at high temperatures, steel undergoes two processes: softening, where the strength decreases with increasing temperature; and creep, where the plastic deformation slowly increases over time under constant stress. Plastic deformation in steel at high temperatures is caused by intragranular slip and grain boundary slip. Improving the high-temperature strength of steel is usually achieved through alloying. This involves adding alloying elements to the steel to increase the interatomic bonding force and form a favorable microstructure.


Adding chromium, molybdenum, tungsten, vanadium, and titanium can strengthen the steel matrix, increase the recrystallization temperature, and form strengthening phases such as carbides or intermetallic compounds. These strengthening phases are stable at high temperatures, do not dissolve or grow, and maintain their hardness. The addition of nickel is primarily to obtain austenite. Austenite has a more compact atomic arrangement than ferrite, with stronger interatomic bonding forces and more difficult atomic diffusion. Therefore, austenite has better high-temperature strength. Thus, the high-temperature strength of heat-resistant steel is related not only to its chemical composition but also to its microstructure.

Send Inquiry